SiC Demon Mortar 85 Dry

Product: PliFlow HyMOR SiC 70 KK

                SiC Demon Mortar 85 Dry

Product #: 14805 (PliFlow)

                   17011 (Mortar)

 Service Temperature Limit: 2900°F

 Installation Method:  Pouring, Pumping and Troweling

Shelf Life:  6 months

 Industries:  Waste-to-Energy, Boilers

Best Applications:  These high silicon carbide products are recommended for applications that include:

  1. Waste-to-Energy Boilers
  2. Backfilling behind silicon carbide tile (PliFlow)
  3. Adhering silicon carbide tile to a surface (Mortar)

 Plibrico TDS Link – (PliFlow) https://plibri.co/pliflow-hymor-sic70kk

                                   (Mortar) https://plibri.co/sic-demon-mortar85dry

Product Information: PliFlow™ HyMOR® SiC 70 KK is a 70% silicon carbide, self-flowing/self-leveling low cement castable.   SiC Demon® Mortar 85 Dry is a dry, high silicon carbide content refractory mortar.   Both products have high thermal conductivity to support efficient thermal transfer.   Product advantages include:

  • High thermal conductivity
  • Resistance to corrosion from gases at low temperatures
  • Good fracture toughness

Available Internationally As:  Plico® Flow LC SiC 70 KK

                                                  SiC Demon® Mortar 85 Dry

 Plibrico SDS Link – (PliFlow) https://plibri.co/2NoWm1C

                                   (Mortar) https://plibri.co/3fOPxml

/by

Ultra Demon Air Set Wet Mortar

Product: NEW: Ultra Demon Air Set Wet Mortar

Product#: 17005

Service Temperature Limit: 3000°F

Installation Method: Troweling, Dipping

Shelf Life: 9 months

Industries: Aluminum, Power Generation, Off-Gas, Steel, Mineral Processing, Boilers, Incineration

Best Applications: Engineered for strength and extended workability. Typical applications include laying up intermediate, high duty and super duty fireclay brick:

  1. Boilers
  2. Incinerators/Thermal oxidizers
  3. Heat treat and reheat furnaces
  4. Homogenizing/Forge furnaces
  5. Precast shapes installation

Plibrico TDS Link – http://bit.ly/39ioEEg

Product Information: Ultra Demon Air Set Wet Mortar is an enhanced wet, air setting, super duty refractory mortar. Creamier in texture as compared to other mortars, the material has been engineered to be incredibly pliable giving it a more predictable consistency over time – only a 5% workability difference at 100 days. This versatile material is 2X stronger to better bond bricks together and can also be used for hot spot/fill injection with a suitable grout pump. Other product advantages include:

  • Impressive workability score: 46% better 45-day workability
  • High bonding strength
  • Workable, creamier texture
  • Excellent adhesion properties
  • Good coverage at 350-400lb (160-180 kg) per 1000 standard firebrick

Available Internationally As: Ultra Demon Air Set Wet

Plibrico SDS Link – http://bit.ly/2SHQLag

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS