• Focus on Safety

Focus on Safety

Rely on our National Safety Manager for his expertise before and during your refractory installation.

Safety is the most critical consideration in refractory installation and construction. Therefore, safety is our number one objective at Plibrico.

Because of our commitment to safety, Plibrico invests in a full-time, on-staff National Safety Manager. Our refractory Safety Manager is knowledgeable on the most current safety regulations as they relate to refractory installation and construction, and is available to assist you in safety planning, training and safety monitoring before and during installation.

Plibrico’s Commitment to Safety

  • Safety is supported and encouraged by upper management.
  • Safety is a company-wide practice and belief that is expected on the job and in our daily lives.
  • Safety trained job site leadership with our Safety Manager is available to oversee any project.
  • Safety experienced supervision and leadership manage every project.
  • Safety trained workforce in job-specific safety, as well as traditional safety topics, is required.
  • Safety meetings are held to train and educate employees on safety regulation, policies and procedures.
  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS