PliGlue

Product: PliGlue

Product #: 62100

Service Temperature Limit: 2800°F

Installation Method:  Brushing or Spraying

Shelf Life:  12 months

Industries:  Mineral Processing, Aluminum, Steel, Power Generation, Boilers, Incineration, Off-Gas, Foundry

Best Applications:  Great in every thermal processing industry, designed for refractory repair applications, including:

  1. High temperature adhesive for refractory ceramic fiber blanket against dense refractory
  2. All types of refractory repair where new refractory needs to bond to old refractory
  3. Repairs with non-wetting requirements

Plibrico TDS Link – http://plibri.co/tds-pliglue

Product Information: PliGlue is a liquid phosphate binder that can be applied by spay or brush for various refractory applications.   Functioning as a bonding enhancer, use this material to enhance the bond between new and repaired/worn refractories.  Product advantages include:

  • Excellent adherence to existing refractory
  • Superior bonding strength between refractory surfaces
  • Versatile application, brush or spray
  • Installation friendly

Available Internationally As:  Plico® PliGlue

Plibrico SDS Link – https://plibri.co/3iCyOnt

/by

SiC Demon Mortar 85 Dry

Product: PliFlow HyMOR SiC 70 KK

                SiC Demon Mortar 85 Dry

Product #: 14805 (PliFlow)

                   17011 (Mortar)

 Service Temperature Limit: 2900°F

 Installation Method:  Pouring, Pumping and Troweling

Shelf Life:  6 months

 Industries:  Waste-to-Energy, Boilers

Best Applications:  These high silicon carbide products are recommended for applications that include:

  1. Waste-to-Energy Boilers
  2. Backfilling behind silicon carbide tile (PliFlow)
  3. Adhering silicon carbide tile to a surface (Mortar)

 Plibrico TDS Link – (PliFlow) https://plibri.co/pliflow-hymor-sic70kk

                                   (Mortar) https://plibri.co/sic-demon-mortar85dry

Product Information: PliFlow™ HyMOR® SiC 70 KK is a 70% silicon carbide, self-flowing/self-leveling low cement castable.   SiC Demon® Mortar 85 Dry is a dry, high silicon carbide content refractory mortar.   Both products have high thermal conductivity to support efficient thermal transfer.   Product advantages include:

  • High thermal conductivity
  • Resistance to corrosion from gases at low temperatures
  • Good fracture toughness

Available Internationally As:  Plico® Flow LC SiC 70 KK

                                                  SiC Demon® Mortar 85 Dry

 Plibrico SDS Link – (PliFlow) https://plibri.co/2NoWm1C

                                   (Mortar) https://plibri.co/3fOPxml

/by

Ultra Demon Air Set Wet Mortar

Product: NEW: Ultra Demon Air Set Wet Mortar

Product#: 17005

Service Temperature Limit: 3000°F

Installation Method: Troweling, Dipping

Shelf Life: 9 months

Industries: Aluminum, Power Generation, Off-Gas, Steel, Mineral Processing, Boilers, Incineration

Best Applications: Engineered for strength and extended workability. Typical applications include laying up intermediate, high duty and super duty fireclay brick:

  1. Boilers
  2. Incinerators/Thermal oxidizers
  3. Heat treat and reheat furnaces
  4. Homogenizing/Forge furnaces
  5. Precast shapes installation

Plibrico TDS Link – http://bit.ly/39ioEEg

Product Information: Ultra Demon Air Set Wet Mortar is an enhanced wet, air setting, super duty refractory mortar. Creamier in texture as compared to other mortars, the material has been engineered to be incredibly pliable giving it a more predictable consistency over time – only a 5% workability difference at 100 days. This versatile material is 2X stronger to better bond bricks together and can also be used for hot spot/fill injection with a suitable grout pump. Other product advantages include:

  • Impressive workability score: 46% better 45-day workability
  • High bonding strength
  • Workable, creamier texture
  • Excellent adhesion properties
  • Good coverage at 350-400lb (160-180 kg) per 1000 standard firebrick

Available Internationally As: Ultra Demon Air Set Wet

Plibrico SDS Link – http://bit.ly/2SHQLag

/by

Plistix SR-90

Product: Plistix SR-90

Product #: 12020

Service Temperature Limit: 3300°F

Installation Method:  Troweling, Brushing, Ramming

Shelf Life:  3 months

Industries:  Aluminum, Mineral Processing, Steel, Power Generation, Boilers, Incineration, Off Gas, Thermal Oxidizers, Pulp & Paper

Best Applications:  Ideal for repair applications in industrial processes that require a high strength servicing mix:

  1. Worn or abraded refractory surfaces
  2. Spalled refractories
  3. Cracks
  4. Repairs with non-wetting requirements

Plibrico TDS Link – https://plibri.co/3hU6dcA

Product Information: Plistix SR-90 is fine grain, high alumina, phosphate bonded “plaster” type of refractory service mix.   Similar in chemistry and minerology other Plibrico high alumina phosphate bond plastic refractories (Plibrico 90 S, and Plibrico SR-90), Plistix SR-90 is manufactured in a thick mortar type consistency making it ideal for patching and service applications.   It can be applied as is from the bucket for troweling, or thinned with water for a grout or wash coat.   Product attributes include:

  • High service limit – 3300°F
  • Plaster type consistency
  • Good bonding strength to old refractory
  • Good slag resistance
  • Non-wetting to aluminum alloys
  • Meets ASTM classification C673 90% Alumina

Available Internationally As:  Plico® Stix SR-90

Plibrico SDS Link – https://plibri.co/3hXNbC9

/by

Plistix SR-68

Product: Plistix SR-68
Product #: 17704

Service Temperature Limit: 3100°F

Installation Method: Troweling, Brushing, Ramming
Shelf Life: 3 months

Industries: Mineral Processing, Power Generation, Aluminum/Non-Ferrous, Steel, Boilers, Incineration, Off-Gas

Best Applications: This material is best used for repairs in industrial processes that require a high strength service mix:

  1. Worn, abraded refractory surfaces
  2. Spalled refractories
  3. Cracks
  4. Incineration
  5. Waste to Heat – Boilers

Plibrico TDS Link – http://bit.ly/2WFpLbK

Product Information: Plistix™️ SR-68 is a fine grain, mullite based, phosphate bond “plaster” type refractory service mix. Similar in chemistry and minerology to the other Plibrico Company mullite based phosphate bond plastic refractories (Plibrico 68, S, SA), Plistix SR-68 is manufactured with a thick mortar type consistency making it ideal for patching and service applications. It can be applied with a trowel as is from the bucket, or thinned with water for a grout or wash coat. Product attributes include:

  • Plaster type consistency
  • Good bonding strength to old refractory
  • Good slag resistance
  • Non-wetting to aluminum
  • Meets ASTM classification C673 70% Alumina

Available Internationally As: Plico®️ Stix SR-68

Plibrico SDS Link – http://bit.ly/328DlFS

/by

Plistix ABR

Service Temperature Limit

2500°F

Installation Method

Ramming or Vibration Casting

Shelf Life

3 months

Industries

Power Generation, Boiler, Incineration, Petrochemical, Refining, Off Gas, Aluminum, Steel, Mineral Processing, Kiln, Pulp & Paper

Best Applications

Extreme environments where sever conditions require high abrasion resistance.   Applications in various industrial processes including:

  1. Thin wall linings with hex mesh or S-bar anchoring systems
  2. Cyclones
  3. Pipe and elbow linings
  4. Chutes and ducts
  5. Nozzles
  6. Wear pads

Product Information

Plistix ABR is an ultra abrasion-resistant castable refractory.   This castable utilizes a hybrid calcium aluminate/phosphate bond and is designed to yield high strength and abrasion resistance over a wide temperature range.   The material can be installed by ramming, tamping or vibration casting.   Bake out is per Plibrico Schedule C or C Linear.   Plistix ABR product advantages include:

  • Low, uniform abrasion loss of 3cc or less, from room temperature to over 2000°F
  • High crushing strength and hot MOR
  • Single component system “just add water”
/by

Plistix 900 F

Product: Plistix 900 F
Product #: 17505

Service Temperature Limit: 3400°F

Installation Method: Brushing, Spraying, Injecting, Troweling, Tamping
Shelf Life: 12 months

Industries: Mineral Processing, Aluminum, Steel, Power Generation, Boilers, Incineration, Off-Gas, Foundry

Best Applications: Great in every industry as a repair and servicing material. Approximate mixing water additions for installation requirements:

  1. Thin brush coat/spray/injection: 16% – 22%
  2. Thick brush coat: 14% – 15%
  3. Troweling: 12% – 15%
  4. Putty: 10% – 12%

Plibrico TDS Link – http://bit.ly/2HfeF6K

Product Information: Plistix™️ 900 F is a versatile high temperature service mix. Based on a corundum aggregate and matrix, with a phosphate bond, it has applications in furnaces, boilers and process vessels in virtually every industry. Supplied as a damp powder, it is mixed with water to various consistencies to be used as a coating, grout, putty and mortar. Use this material to service and repair cracks, spalls and worn refractories … it can also function as a bonding enhancer with plastic repairs. Product advantages include:

  • 3400°F serviced limit
  • High alumina and low iron content
  • Good adherence and bonding strength
  • Good resistance to acids and slags
  • Non-wetting to aluminum

Available Internationally As: Plico®️ Stix 900 F

Plibrico SDS Link – http://bit.ly/2YWWTjE

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS