Plicast LWI 24

Product: Plicast LWI 24

Product #: 16007

 Service Temperature Limit: 2450°F

 Installation Method:  Casting

Shelf Life:  12 months

 Industries:  Aluminum, Mineral Processing, Power Generation, Boilers, Incineration, Off Gas, Thermal Oxidizers

Best Applications:  Engineered for applications requiring a high temperature insulating component, these include:

  1. Reheat, car bottom and annealing furnaces – backup insulation
  2. Boilers
  3. Incinerators and thermal oxidizers
  4. Aluminum furnaces – upper wall and backup insulation
  5. Mineral processing kilns – backup insulation
  6. Fired process heaters
  7. Dryers

Plibrico TDS Link – https://plibri.co/2RDMljk

Product Information: Plicast® LWI® 24 is the workhorse of Plibrico’s insulating refractory castables.   A service limit of 2450°F, moderate density, and adequate strength, make this material suitable for use as either as an efficient backup insulating component, or a primary lining material in less demanding, moderate temperature applications.   Product advantages include:

  • Good strength
  • 2450°F service limit
  • Medium density ~80 pcf
  • Moderately low thermal conductivity
  • Good volume stability
  • Good casting consistency
  • Good product storage life: 12 mth

Available Internationally As:  Plico® Castable LW 24

 Plibrico SDS Link – https://plibri.co/2HeEQh7

/by

Plicast LWI 22

Product: Plicast LWI 22

Product #: 16015

Service Temperature Limit: 2200°F

Installation Method:  Casting

Shelf Life:  12 months

Industries:  Aluminum, Mineral Processing, Steel, Power Generation, Off Gas, Incinerators, Thermal Oxidizers

Best Applications:  Engineered for applications that require a thermally efficient insulating component.   Applications include:

  1. Reheat, Car Bottom, and Annealing Furnaces – backup insulation
  2. Boilers
  3. Incinerators and Thermal Oxidizers
  4. Aluminum furnaces – upper wall and roof back up insulation
  5. Mineral Processing Kilns – backup insulation
  6. Fired Process Heaters
  7. Dryers
  8. Stacks

Plibrico TDS Link – https://plibri.co/3eWrlRP

Product Information: Plicast® LWI 22 is an intermediate temperature insulating castable.   With a service limit of 2200°F, Plicast LWI 22 possesses low density and good thermal efficiency making it suitable for use either as an effective backup insulating component or as a primary lining material in less demanding, lower temperature applications.   Product advantages include:

  • Low Density
  • Low Thermal Conductivity
  • Adequate Strength
  • Versatility for a wide range of applications
  • Long Storage Life

Available Internationally As:  Plico® Castable LW 22

Plibrico SDS Link – https://plibri.co/3tJ4E81

/by

Plicast LWI 20

Product: Plicast LWI 20

Product #: 16005

Service Temperature Limit: 2000°F

Installation Method:  Casting

Shelf Life:  12 months

Industries:  Aluminum, Mineral Processing, Steel, Power Generation, Boilers, Incineration, Off Gas, Thermal Oxidizers

Best Applications:  Engineered for applications that require a thermally efficient insulating component.   Applications include:

  1. Reheat, car bottom and annealing furnaces – backup insulation
  2. Boilers
  3. Incinerators and thermal oxidizers
  4. Aluminum furnaces – upper wall and backup insulation
  5. Mineral processing kilns – backup insulation
  6. Fired process heaters
  7. Dryers
  8. Stacks

Plibrico TDS Link – https://plibri.co/33Qw0yR

Product Information: Plicast® LWI® 20 is a moderate temperature insulating castable.   With a service limit of 2000°F, Plicast LWI 20 possesses low density and thermal efficiency making it suitable for use as either as an efficient backup insulating component or as a primary lining material in less demanding, lower temperature applications.   Product advantages include:

  • 2000°F service limit
  • Low density <60 pcf
  • Adequate strength
  • Low thermal conductivity
  • Good volume stability
  • Good casting consistency
  • Good product storage life – 12 mo

Available Internationally As:  Plico® Castable LW 20

Plibrico SDS Link – https://plibri.co/3jTFkHB

/by

Plicast C/G LWI 23 LI

Product: Plicast C/G LWI 23 LI

Product #: 16226

Service Temperature Limit:  2300°F

Installation Method:  Casting or Gunning

Shelf Life: 12 months

Industries: Petrochemical, Off-Gas, Incineration

Best Applications: Engineered as a high purity, very low-iron, light weight insulating refractory.   Typical applications include:

  1. Petrochemical heater walls & roofs
  2. Regenerator linings in FCCU processes
  3. Incinerators
  4. Thermal Oxidizers
  5. CO Furnaces

Plibrico TDS Link – https://plibri.co/3jdm4qX

Product Information: Plicast® C/G LWI 23 LI is a premium intermediate temperature insulating castable.   The material contains very high purity calcium aluminate cement and aggregates for the demanding needs of the petrochemical and other heat processing industries.   This material has been engineered to have the flexibility and versatility to be either cast or gunned into place.   Product advantages include:

  • Good CCS and hot strength for a light-weight insulator
  • Good Density: 68 pcf
  • 2300°F Service Limit
  • Good Thermal Conductivity
  • Very low iron content
  • Good gunability

Available Internationally As: Plico® Castable C/G LW 23 LI

Plibrico SDS Link – https://plibri.co/3jfyi2i

/by

Plicast C/G LWI

Product: Plicast C/G LWI

Product #: 18012

 Service Temperature Limit: 2400°F

 Installation Method:  Casting or Gunning

Shelf Life:  12 months

 Industries:  Mineral Processing, Aluminum, Steel, Power Generation, Refining, Off Gas, Boilers, Kilns

Best Applications:  Engineered for applications requiring a moderate temperature back up insulating component of normal strength.   Typical applications include:

  1. Boilers
  2. Heat treating and homogenizing furnaces
  3. Incinerators and thermal oxidizers
  4. Mineral processing kilns and furnaces
  5. Aluminum melting furnaces
  6. Dryers
  7. Stacks

Plibrico TDS Link – https://plibri.co/3hs3tnG

Product Information: Plicast® C/G LWI® is a versatile and economical insulating refractory.   With a service limit of 2400°F and low density, this material was designed to give the refractory user the option of installing it either by casting or dry gunning.   Product advantages include:

  • 2400°F serviced limit
  • Low density ~65 pcf
  • Low thermal conductivity
  • Adequate strength
  • Installation versatility

Available Internationally As:  Plico® Castable  C/G LW

 Plibrico SDS Link – https://plibri.co/34KeJbB

/by

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS