Plicast LWI 30

Availably Internationally: Plico Castable LW 30
Class: Insulating Castable Refractories
Category: Plicast LWI
Type: Insulating Castable Refractories

Product: Plicast LWI 30
Product #: 3234

Service Temperature Limit: 3000°F

Installation Method: Casting
Shelf Life: 9 months

Industries: Aluminum/Non-Ferrous, Steel, Power Generation, Off-Gas, Incineration, Boilers

Best Applications: Uses that require a very high temperature insulating component or reducing atmosphere resistant component. Typical applications include:

  1. Fired heaters – radiant sections and roofs
  2. Atmosphere heat treat furnaces and vessels
  3. Incinerators and thermal oxidizers
  4. Boilers
  5. Reheat and forge furnaces – roofs

Plibrico TDS Link – http://bit.ly/2oIdDKn

Product Information: Plicast®️ LWI 30 is a very high temperature insulating castable that is based on a light weight alumino-silicate aggregate system. With a service limit of 3000°F, and good mechanical strength, it suitable for use as either backup insulating component in high temperature applications, or as a primary lining material in a less severe environment. A low iron content makes it ideal for use in reducing combustion applications. Conforms to ASTM classification C401 Class U. Product advantages include:

  • 50+% alumina content
  • Low iron content <1% and low alkali content <0.5%
  • Medium density ~95 pcf
  • Good mechanical strength
  • Good volume stability and linear shrinkage
  • Low thermal conductivity
  • Good casting consistency

Available Internationally As: Plico®️ Castable LW 30

Plibrico SDS Link – http://bit.ly/2nbD8TJ

Plicast HyREZIST 3000 C KK Pligun HyREZIST 3100 KK

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS