Plicast Fast Track 75-31

Availably Internationally: Plico Castable Fast Track 75-31
Class: Rapid Heat-Up Castable Refractories and Gun Mixes
Category: Plicast and Pligun Fast Track Refractories
Type: Fast Track

Product: Plicast Fast Track 75-31
Product #: 14287

Service Temperature Limit: 3100°F
Installation Method: Casting or Pumping
Shelf Life: 9 months

Industries: Aluminum, Mineral Processing, Steel, Power Generation, Kilns, Off Gas, Incineration, Boilers

Best Applications: This material offers a wide range of applications in a variety of industrial processes including:

  1. Aluminum Furnaces – non-metal contact areas
  2. Mineral Processing Kilns – alumina, cement and aggregate calcining
  3. Steel/Ferrous – reheat/forge furnace hearths, jambs, lintels, sills roof and walls; pipe coverings; ladles
  4. Thermal Oxidizers and Incinerators– inlets and burner cones, combustion chambers, choke rings
  5. Biomass Furnaces – Walls, combustion chamber, and tuyeres
  6. Boilers

Plibrico TDS Link – https://plibri.co/2TVJ4xZ

Product Information: Plicast®️ Fast Track 75-31 is based on a bauxite aggregate system. The material is a 75 % alumina, ultra-low cement castable designed to be put into service more rapidly than traditional low and ultra-low cement materials. Cure times can be reduced to 4 hrs, though for ideal physical characteristics 8 hrs is recommended. After curing, heat can progress at rates of up to 100°F/hr with no temperature hold (linear schedule). Please refer to Plibrico’s bake out schedule FT for specifics. Other product characteristics include:

  • High strength especially hot MOR at elevated temperature
  • Low abrasion loss <10cc loss
  • Good volume stability
  • Good resistance to alkali attack and slags

Plicast Fast Track 75-31 has good flow and setting characteristics allowing it to be place by vibration, casting or pumping.

Available Internationally As: Plico®️ Castable Fast Track 75-31

Plibrico SDS Link – https://plibri.co/2wbYXqW

Plicast Fast Track 50-30 Pligun Fast Track 25

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.

AcceptLearn more

  • Plibrico® Plastic Refractories

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®Super F AB 58% 2900F / 1590C SDS
    Plibrico®60 AB 58% 3100F / 1705C SDS
    Plibrico®80 AB 78% 3200F / 1760C SDS
    Plibrico®90 AB 90% 3400F / 1871C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico®55 S 54% 3000F / 1648C SDS
    Plibrico®68 S 68% 3100F / 1705C SDS
    Plibrico®68 SA 68% 3100F / 1705C SDS
    Plibrico®85 S Special 83% 3300F / 1815C SDS
    Plibrico®90 S 90% 3400F / 1870C SDS
    Plibrico®SiC 80 (80% SiC) 2700F / 1480C SDS

    (fine grain – soft)

    Product Name %Al2O3 Service Limit SDS
    Plibrico®SR 68 68% 3100F / 1705C SDS
    Plibrico®SR 85 83% 3300F / 1815C SDS
    Plibrico®SR 90 88% 3400F / 1870C SDS

    Plibrico HyRATE® Plastic Refractories – Gunning Grade

    Clay/Air Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®Super F AB 43% 2900F / 1595C SDS
    Plibrico HyRATE®60 AB 60% 3100F / 1705C SDS
    Plibrico HyRATE®80 AB 78% 3200F / 1760C SDS

    Phosphate Bond

    Product Name %Al2O3 Service Limit SDS
    Plibrico HyRATE®68 S 68% 3100F / 1705C SDS
    Plibrico HyRATE®85 S Special 84% 3300F / 1815C SDS